Euro 6 Emissions Compliance Guide
The approval of the new Euro VI emissions standards for Australia and New Zealand under the ADR 80/04 standard marks a significant advancement from the previous ADR, which was based on Euro V. Compliance with these regulations is imperative for vehicle manufacturers intending to continue selling vehicles in the region, and fleet operators need to be aware of continuing compliance obligations including compliant replacement truck parts.
This article offers a guide to complying with the new regulations.

What are Euro 6 standards for truck and bus parts?
Presenting a challenge for manufacturers, the Euro VI emissions standards are a big step up from Euro V. With 70-80% decreases in allowable emissions, the new regulations also call for improved emissions tests, better on-board diagnostics, emissions monitoring systems for monitoring, and more durable emissions control.
Below are the emissions allowed under the Euro VI standards, with clear decreases from Euro V:
· NOx (Nitrogen oxides) – 460mg/kWh (down 77%)
· Particulate Matter – 10mg/kWh (down 66%)
· HC (Hydrocarbons) – 160mg/kWh (down 70%)
It’s noteworthy that fuel efficiency is not a component of the new standards. However, a secondary benefit of the latest technologies to reduce emissions is improved fuel efficiency.
When do Euro 6 standards start in Australia and New Zealand?
Euro VI (or ADR 80/04) comes into effect for new truck models approved for sale from the 1st of November 2024.
By 1st of November 2025, manufacturers must apply the standards to existing models if they intend to continue selling them in Australia and New Zealand.
Do older vehicles need new truck and bus parts retrofitted?
No, older heavy vehicles won’t require new truck and bus parts to be retrofitted. The new standards apply to new models approved for sale after November 2024. Vehicles approved for sale before November 2024 must also comply by November 2025 if the manufacturer wishes to keep selling the model.
These standards do not apply to heavy vehicles that are already registered. Therefore, fleet operators are not obligated to retrofit new emission technologies to make older trucks comply with these new regulations. However, when replacing parts, owners may consider upgrades to enhance performance and fuel efficiency.
International emissions standards equivalent to Euro VI
Japanese and American trucks are popular in Australia and New Zealand. Japan and the United States of America have their own legislated standards based on the Euro VI recommendations. These standards are equivalent but fall under a different legal authority than Euro VI.
Japanese and American trucks that already meet equivalent standards under aligned laws are deemed to comply with Euro VI in Australia and New Zealand.
Considerations for Fleet Operators
The Euro VI emissions standards apply to vehicle manufacturers, not fleet operators, but fleet operators are required to maintain the compliance of their vehicles. As such, the release of this new standard may influence future truck and bus purchases based on the relative cost and availability of replacement and compliant Euro VI truck and bus parts.
The emissions standards aren’t just about environmental impacts. They also help improve fuel efficiency and safety. Owners considering purchasing a new heavy vehicle may be inclined to wait until fully-fitted Euro VI-standard vehicles are available.
Read More: